Filter
Top Products
PLAYBACK FEATURES 45
Sequential/Loop Playback
You can insert two tapes in
your Dual-Deck VCR and have
them play sequentially or in a
continuous loop. For example,
you may rent a movie that
comes on two videotapes and
watch them seamlessly one
after the other. You may also
set two sales or training tapes
to loop continuously.
1
2
Open “Setup Menu”
Press and hold the menu button on the
remote control for 3 seconds.
Select “Dual-Deck Features”
Press 4.
Set “Playback Mode”
Press 2 repeatedly to set Playback Mode to:
• Normal — Tapes play normally (default
setting).
• Seq (Sequential) — The tape in Deck 1
will play to the end, then the tape in
Deck 2 will play to the end.
• Loop — The tape in Deck 1 will play to
the end, then the tape in Deck 2 will play
to the end. While Deck 2 is playing, the
tape in Deck 1 will rewind to the begin-
ning. This process will repeat continu-
ously until you press Stop on the deck in
Play.
1
2
3
4
5
7
89
AUTO
SHUTTLE
TRK TRK
POWER
C
O
P
Y
T
A
P
E
SLOW
6
¥TV
¥CABLE
¥DSS
VCR
DECK1
DECK2
MENU
0
0
0
0
9
A
/
¥
E
N
T
E
R
SETUP MENU
1 Set Clock Menu
2 : Copy/Record Settings
3 : Tuner And Channel List
4 : Dual-Deck Features
5 : Reset Factory Settings
____________________________________
/ = Move = Sel MENU=Quit
➔
➔
➔
➔
DUAL-DECK FEATURES
1 Remote Eject On
2 : Playback Mode Normal
3 : Auto Play / Rewind Both
4 : Panel Display Auto
5 : Screen Display Auto
____________________________________
/ = Move = Sel MENU=Quit
➔
➔
➔
➔
DUAL-DECK FEATURES
1 : Remote Eject On
2 Playback Mode Normal
3 : Auto Play / Rewind Both
4 : Panel Display Auto
5 : Screen Display Auto
____________________________________
/ = Move = Sel MENU=Quit
➔
➔
➔
➔
Normal
Seq
Loop
3
1
2
3
4
5
7
89
AUTO
SHUTTLE
TRK TRK
POWER
C
O
P
Y
T
A
P
E
SLOW
6
¥TV
¥CABLE
¥DSS
VCR