Filter
Top Products
Press
a
/
b
to select “Analog & Digital” to
search both analog and digital broadcasts or
“Analog” to search only analog broadcasts or
“Digital” to search only digital broadcasts, and
then press ENTER.
Press
a
/
b
to select “Yes” or “No”, and then
press ENTER.
• The Channel search will start automatically.
• To exit the Channel search screen, press
RETURN.
18
Initial setup
When you turn on the TV for the fi rst time, it will automatically memorize the broadcasting channels where you live.
Perform the following steps before you press POWER on the remote control unit.
1. Insert the batteries into the remote control unit. (See page 9.)
2. Connect the antenna cable to the TV. (See page 14.)
3. Plug in the AC cord to the AC outlet. (See page 8.)
Language setting
Select from among 3 languages: English, French and
Spanish.
Press
a
/
b
to select the desired language
listed on the screen, and then press ENTER.
Channel search
Channel auto search makes the TV look for all
channels viewable in the set area.
When “Air/Cable” has been selected in
Antenna setting and then press ENTER
again.
Example
Antenna setting
Make sure what kind of connection is made with your
TV when selecting “Air”, “Cable(STD)”, “Cable(HRC)” or
“Cable(IRC)”.
Press
a
/
b
to select “Air”, “Cable(STD)”,
“Cable(HRC)” or “Cable(IRC)”.
Press ENTER to enter the setting.
Example
Watching TV
1
2
3
• If no channel is found, confi rm the type of connection made
with your TV and try EZ Setup again. (See page 24.)
Language
Air/Cable
CH Search
Language
Air/Cable
C
H
S
earc
h
CH Search
Air
Cable (HRC)
Cable (IRC)
Cable (STD)
Language
Air/Cable
CH Search
Analog & Digital
Digital
Analog
Yes
No
Analog
Air [69]