Filter
Top Products
Appendix
Before detaching (or attaching) stand, unplug the AC cord from the AC INPUT terminal.
® Do not remove the stand from the TV unless using an optional wall mount bracket to mount it.
Before attaching/detaching stand
• Before performing work make sure to turn off the TV.
• Before performing work spread cushioning over the base area to lay the TV on. This will prevent it from being
damaged.
"_-._,_ Hex key -_"=_
r®
LC-46D43U/LC-52B43U
_-t_-"_ Hex key
TI TT
i \ "
LC-42D43U
Unfasten the four screws used
to secure the stand in place.
Detach the stand from the TV.
(Hold the stand so it will not drop
from the edge of the base area.)
,, To attach the stand, perform the above steps in reverse order.
The model AN-37AG2 of the wall mount bracket can be used only with LC-42D43U.
® This TV should be mounted on the waft only with the AN-37AG2/AN-52AGf (SHARP) wall mount bracket, The use
of other wall mount brackets may result in an unstable installation and may cause serious injuries.
® Installing the "IV requires special skill that should only be performed by qualified service personnel. Customers
should net attempt to de the work themselves, SHARP bears no responsibility for improper mounting or mounting
that results in accident or injury,
Using an optional bracket to mount the TV
* You can ask a qualified service professional about using an optional AN-37AG2/AN-52AG1 bracket to mount the
TV to the wall.
e Carefully read the instructions that come with the bracket before beginning work.
r
Hanging on the wall
AN-37AG2/AN-52AG1 wall mount bracket.
(Seethe bracketinstructionsfor details.)
Vertical mounting Angular mounting
About setting the TV angle and height adjustment
f
0o/5 °
f J
AN-37AG2
f
AN-52AGf
J
For AN-52AGf
0/5/10/15/20 °
(_ Angle of TV
(_ Height
Adjustment
1 63/6_( 5)/0/
+ 1 63/6_(+ 5)
"(:an be moved
1 _3/_4(5) up or
down
Unit: inch (cm)
J
,, Detach the (:able (:lamps on the rear o1the TV when using the optional mount bracket.
Q- 51