Filter
Top Products
27
Color Temp.
(Color Temperature)
For a better white balance, use color temperature correction.
High: White with bluish tone
Mid-High:
Middle:
Mid-Low:
Low: White with reddish tone
White balance can be adjusted between a maximum of
+30 and a minimum of –30 for each color temperature.
R Gain (LO/HI): –30 through +30
G Gain (LO/HI): –30 through +30
B Gain (LO/HI): –30 through +30
•
For resetting all adjustment items to the factory preset
values, press
a
/
b
to select "Reset", and then press
ENTER
.
Motion Enhancement
Use Motion Enhancement to view fast-action video
more clearly.
■
LC-70LE640U/LC-60LE640U/LC-52LE640U
120Hz High/120Hz Low: For obtaining a clearer image.
Off: Normal image.
■
LC-80LE633U/LC-70C6400U/LC-60C6400U/
LC-52C6400U
AquoMotion240: Turns the LED backlight on or off to
display motion picture more smoothly and clearly.
120Hz High/120Hz Low: For obtaining a clearer image.
Off: Normal image.
• "Motion Enhancement" may cause image noise. If this
occurs, turn the function "Off".
• When AV MODE is set to "GAME" or "PC", or PC format is
being input, "Motion Enhancement" is not available.
Active Contrast
Automatically adjusts the image contrast according to
the scene.
On: Automatically adjusts the image contrast.
Off: No adjustment.
Gamma Adjustment
Adjusts the differences of picture tones between bright
parts and dark parts. The adjustment range of the
gamma can be set to a maximum of +2 and a minimum
of –2 by pressing
c
or
d
.
Black Level
Adjusts on-screen black level to your preferred level.
High: The black level gets brighter.
Low: The black level gets darker.
•
"Black Level" is available for input signal from Composite
Video, Component 480i and analog broadcasts (air and
cable).
On-Screen Display Menu
Film Mode (3:2 pull-down)
Automatically detects a fi lm-based source (originally
encoded at 24 frames/second), analyzes it then recreates
each still fi lm frame for high-defi nition picture quality.
Advanced: Adjust effect to reduce judder from fi lm
contents. Select a desired level of judder reduction
from 0 to +10.
Standard: Detects, analyzes, converts fi lm source.
Off: Normal viewing mode.
•
"Film Mode" does not function depending on input signal
type.
•
"Film Mode" does not function when you set AV MODE to
"GAME" or “PC”.
•
"Standard" does not function when channel display shows
an input signal resolution of 480p, 720p, or 1080p.
Digital Noise Reduction
Produces a clearer video image.
Auto: Automatically adjusts the level of noise reduction.
High/Middle/Low: Select a desired level for viewing a
clearer video image.
Off: No adjustment.
• "Digital Noise Reduction" is not available when you set AV
MODE to "PC" or PC format is being input.
• When AV MODE is set to "GAME", "Auto" is not available.
Monochrome
For viewing a video in monochrome.
On: For viewing in monochrome.
Off: Normal color.
Range of OPC
The brightness level range of the OPC sensor's automatic
adjustments can be set according to your preferences.
The adjustment range of the OPC sensor can be set to
a maximum of +16 and a minimum of –16.
Max.: –15 through +16
Min.: –16 through +15
•
The "Range of OPC" settings are active only when "OPC"
is set to "On".
•
The maximum setting cannot be set to a smaller number
than the minimum setting.
•
The minimum setting cannot be set to a bigger number
than the maximum setting.
•
Depending on the brightness of the surrounding light, the
OPC sensor might not operate if the adjustment range is
small.