Filter
Top Products
21
p
Disc Playback
Operating the TV of SHARP
Using the Remote Control
The Universal Remote Control may operate the
basic functions of the TV of SHARP.
TV function control
TV Power: B
TV Channel up/down: P r/s
TV Volume up/down: i e/f
TV-AV Selector: b
•
•
•
•
Setting the Remote Control
Code
3 types of remote control codes operate this
Player: RC-1, RC-2 and RC-3. If you operate
this Player by remote control along with another
SHARP Blu-ray Disc Player or DVD Player placed
next to it simultaneously, switching the remote
control code (both the Player and remote control)
to one of the signals (RC-1, RC-2 or RC-3) will let
you operate only with this Player.
Make sure to set the Player and remote control to
the same remote code. You can not operate the
Player if they are not set to the same code.
Setting the Remote Control
Code of the Remote
Example: Setting the code to “RC-3”.
Press and hold 3 first and then B
on the remote control together for
more than 5 seconds.
Press B (on the player) to turn off
the player.
Setting the Remote Control
Code of the Player
Point the remote control at the
player, then press and hold the
DISPLAY button for more than 10
seconds.
Press B (on the remote control) to
turn on the player.
•
•
1
2
3
4
Before Starting Playback
B (POWER)
Remote control sensor
BD-HP21H_en.indd 21BD-HP21H_en.indd 21 2008/08/07 17:40:242008/08/07 17:40:24