Sharp BD-HP21H Blu-ray Player User Manual


 
22
Turning the Power On
Turning the power on
Press B on the remote control or on the
Player to turn on the power of the Player.
Entering standby
Press B on the remote control or on the
Player to enter standby.
If you press B again immediately after entering
standby, the Player may not turn on. If this
happens, wait for 10 seconds or more and then
turn on the power again.
NOTE
When the a (STANDBY) indicator is blinking (may
take some time), the Player cannot be turned on.
Indicators on the Player
I (ON) indicator
Green on Power on
a (STANDBY) indicator
Red blinks Preparing for standby
Red on Standby
BD/DVD/CD mode indicator
Off No disc
Blue on Playing back
White on Disc stopped
White blinks Loading a disc
When you turn on the POWER, the MENU screen
automatically displays for a while.
Press EXIT to erase the display.
Language Setting
Changing the on-screen
display language
Press SETUP to display the SETUP
MENU screen.
Press a/b/c/d to select “ON
SCREEN LANGUAGE”, then press
ENTER.
DISPLAYS THE TITLE LIST SETTINGS
ON SCREEN LANGUAGE
PICTURE
Press a/b/c/d to select the
language you want to display on the
screen, then press ENTER.
ENGLISH SVENSKA
NEDERLANDS
PORTUGUÊS
DEUTSCH
ESPAÑOL
FRANÇAIS
ITALIANO
NOTE
To select the DVD disc language, such as subtitle
language, etc., see page 25.
1
2
3
Before Starting Playback
B (POWER)
BD/DVD/CD mode indicator
a (STANDBY) indicator
I (ON) indicator
BD-HP21H_en.indd 22BD-HP21H_en.indd 22 2008/08/05 15:56:002008/08/05 15:56:00