Filter
Top Products
22
DTV menu operations
Accessories
Check the version information of the digital module
and allow it to be upgraded (when available).
Version (Software version)
1 Press c/d to select “Accessories”.
2 Press a/b to select “Version”, and then press
OK.
• The software version is displayed.
Software Upgrade
The software for controlling the built-in DTV decoder
can be upgraded when necessary. In Great Britain and
Sweden, this can be achieved via an Over Air
Download.
● Preparation
Confirm and make a note of the current software
version number as in step 2 of Version (Software
version).
● Manual upgrade
1 Press c/d to select “Accessories”.
2 Press a/b to select “Software Upgrade”, and
then press OK. The TV checks all carriers if there
is a new software available for upgrade.
1 If upgrade via Over Air Download is available at
the time:
A confirmation message appears asking you to
accept the upgrade or not.
To download now, select “Yes”. After the upgrade
is completed, the TV restarts automatically with the
new software version installed.
To postpone the download, select “No”. Enter a
more convenient download time as instructed.
The software upgrade will not be carried out if there
is no new software available at the specified
download time.
2 If upgrade via Over Air Download is NOT
available at the time:
A message tells you that there is no software
available to be downloaded.
3 Check the new software version number to confirm
the successful upgrade.
● Auto upgrade
1 When you tune to the service that provides the
upgrade via Over Air Download, a confirmation
message displays.
2 Follow the screen prompts.
3 Check the new software version number to confirm
the successful upgrade.
CAUTION
• Do not disconnect the AC cord when the software
upgrade is in progress, as this may cause the upgrade
to fail. If problem arises ask a qualified service
personnel before the software upgrade period expires.
Common Interface
Check the detailed information on the CI module
(Common Interface module) and CA card (Conditional
Access card) in use.
1 Press OK while the cursor is on “Common
Interface”.
• The CI module name is displayed.
2 Press OK to access the CI menu.
• Detailed information on the CA card in use is
displayed.
3 Press a/b to select the item, and then press OK.
• Detailed information on the selected item is
displayed.
Inserting a CA card
In order to receive coded digital stations, a Common
Interface Module (CI Module) and a CA Card must be
inserted in the CI slot of your TV set.
The CI module and the CA Card are not supplied
accessories. They are usually available from your
dealer.
When the compatible card is not inserted:
1 Select the programme which needs the compatible
CA card.
• The caution screen appears.
2 Insert the compatible CA card.
• The caution screen disappears and you can view
the programme.
CA system supported by: Crypto Works, Aston CAM,
VIAccess, Nagra Vision, Irdeto, MR CAM
NOTE
• To view paid TV broadcasting, you need to make a contract
with a service provider.
Please contact a service provider for details.
NOTE
• To scan all carriers for upgrade availability, perform the
manual upgrade.
• The software upgrade may take about 30 minutes, but
may take longer (up to 1 hour) depending on the signal
status. While updating, you cannot switch to TV or external
input mode or enter standby mode using B on the remote
control unit.
Common Interface
Module
CA card