Filter
Top Products
12
* Press RESET if the TV cannot return to its original state after performing various operations.
This will reset the TV as shown below.
• AV MODE resets to USER.
• TV channel resets to channel 1.
• Dual screen resets to normal.
• Audio setting initialises.
• Dolby Virtual resets to Off.
• Image position is initialised.
** Press SYSTEM RESET if the TV does not operate after starting up.
NOTE
• Pressing RESET will not work if the TV is in standby mode (indicator lights red).
• Pressing RESET will not delete channel preset and password. See page 45 for resetting the password. See page 57 for
initialising to the factory preset values in case you forget your password.
• Still image mode deactivates.
• Teletext mode resets to normal.
• Audio Out setting resets to Fixed.
• Centre Channel Input setting resets to Off.
• Audio Only setting resets to Off.
Part names
TV (Rear)
RESET*
INPUT 2 terminals
SYSTEM RESET**
Antenna input terminal
DC OUTPUT
terminal
SPEAKER terminals
AC INPUT
terminal
RS-232C terminal
INPUT 3 terminals
INPUT 1 terminals
INPUT 4 terminals
CENTRE
CHANNEL INPUT
terminal
MONITOR OUTPUT terminals
LC-32_37GA4X(E)-a 04.9.17, 7:41 AM12