Filter
Top Products
34
Using external equipment
NOTE
• Macintosh adaptor may be required for use for some Macintosh computers.
• When connecting to a PC, the correct input signal type is automatically detected. (See page 42.) If the PC image does
not come in clearly, you may need to set the Auto Sync. adjustment in the “Setup” menu. (See page 36.)
Connecting a PC
Use the INPUT4 terminals to connect a PC.
NOTE
• The PC input terminals are DDC1/2B-compatible.
• Refer to page 52 for a list of PC signals compatible with the TV.
ø 3.5 mm stereo minijack cable
(commercially available)
PC
ø 3.5 mm stereo minijack cable
(commercially available)
RGB/DVI conversion cable
(commercially available)
DVI cable
(commercially available)
To watch the image from this
input terminal, you need to
select input source (see
page 31) and input signal
type (see page 37).
PC
LC-32_37GA4X(E)-f 04.9.17, 7:50 AM34