Filter
Top Products
14
Default Volume
Sets the default volume or turns the Auto adjustment
on or off for when the TV is turned on. The Auto
adjustment sets the volume to a suitable level
depending on the previously used volume setting.
Quick setup for ONCOMMAND users
1
Press MENU and the MENU screen displays.
2
Press
c
/
d
to select “PPV TV”.
3
Press
a
/
b
to select “Default Volume”, and
then press ENTER.
4
Press
a
/
b
to select “Volume” or “Auto
adjustment”.
5
For “Volume”, press c/d to set the default
volume.
For “Auto adjustment”, press c/d to select
“On” or “Off”.
6
Press MENU to exit.
NOTE
• Default Volume setting from the hotel server has priority
over the TV setting.
• For resetting all Default Volume adjustment items to the
factory preset values, select “Reset” in step 4, and then
press ENTER.
Room Mode
You can set “Maximum Volume”, “R/C Buttons”, “TV
Buttons” and “TV INPUT Button” for the ROOM mode.
1
Repeat steps 1 and 2 in Default Volume.
2
Press
a
/
b
to select “Room Mode”, and then
press ENTER.
3
Press
a
/
b
to select the desired item, and
then press ENTER.
4
For “Maximum Volume”, press
c
/
d
to set the
volume.
For “R/C Buttons”, “TV Buttons” and “TV
INPUT Button”, press
c
/
d
to select
“Respond” or “No Respond”, and then press
ENTER.
Selected item Description
Maximum
Volume
Set the maximum volume in the
ROOM mode.
R/C Buttons Select “Respond” to enable or “No
Respond” to disable the functions of
the remote control unit.
TV Buttons Select “Respond” to enable or “No
Respond” to disable the functions of
the TV buttons.
TV INPUT
Button
Select “Respond” to enable or “No
Respond” to disable the functions of
the INPUT button on the TV.
5
Press MENU to exit.
NOTE
• Maximum Volume setting from the hotel server has priority
over the TV setting.
• When you set the Maximum Volume lower than the Default
Volume, the Default Volume setting will be automatically set
to the same level as the Maximum Volume.
• Some buttons on the remote control unit will not work
in the ROOM mode even though “R/C Buttons” is set to
“Respond”.
• Depending on the Room Mode setting, press MASTER or
ROOM on the Remote Replicator to turn on or turn off the
TV
• “TV INPUT Button” is grayed out when “TV Buttons” is set
to “No Respond”.
• For resetting all Room Mode adjustment items to the
factory preset values, select “Reset” in step 3.