Filter
Top Products
40
Power control for PC source
Power control setting allows you to save energy.
Press c/d to select “Power control”.
2
Power save
Press MENU and the PC MENU screen
displays.
1
Press a/b to select “Power Save”, and then
press SET/ENTER.
Press c/d to select the desired backlight
brightness, and then press SET/ENTER.
3
4
PC MENU
Power control Setup
Power Management
Power Save
[Off]
[Manual]
PC MENU
Power control
Power Save
Auto
Manual [+4] –4+4
Basic adjustment settings
Power management
When set, the power will automatically shut down.
Press a/b to select “Power Management”,
and then press SET/ENTER.
Press a/b to select “Mode1” or “Mode2”,
and then press SET/ENTER.
Description
• No power management
• Factory preset value.
• If no signal inputs for 8 minutes, the power
shuts down.
• Even if you start using the PC and the signal
inputs again, the System stays off.
• The System turns on again by pressing
POWER button on the Display or TV
POWER on the remote control unit. (See
page 21).
• If no signal inputs for 8 seconds, the power
shuts down.
• When you start using the PC and the signal
inputs again, the System turns on.
Selected item
Off
Mode1
Mode2
Press c/d to select “Power control”.
Press MENU and the PC MENU screen
displays.
3
4
2
1
PC MENU
Power control Setup
Power Management
Power Save
[Off]
[Manual]
PC MENU
Power control
Power Management
Off
Mode1
Mode2
RECEIVER
POWER
TV/SAT/DVD
RETURN
MENU
SET/
ENTER
MENU
FAVORITE CH
DTV/DVD TOP
SOURCE DTV/SAT
DTV/SAT
VCR REC
ABCD
POWER
MENU
GUIDE
INPUT VOL
VOL
INFO
NOTE
• When setting to “Auto”, the OPC indicator lights up green,
senses the surrounding light and automatically adjusts
the backlight brightness. Make sure no object obstructs
the OPC sensor, which could affect its ability to sense
surrounding light.