Filter
Top Products
56
Rear view
Useful adjustment settings
Connecting external speakers
RED BLACKBLACK RED
When using external speakers
• Change the speaker setting to external speakers. (See
page 57.)
Make sure to connect the speaker jack and cable
polarity (L, +) properly
• The speaker jacks have plus (L) and minus (+) polarity.
• Plus is red and minus is black.
• The cables are also divided into plus and minus.
• When connecting the left/right speakers, be sure to
connect the plus/minus jacks with the correct cables.
NOTE
• See page 11 for bundling the cables of the external
speakers.
• Unplug the AC cord from the AC outlet before installing
the speakers.
How to connect the speaker cable
Pull up the lid.
Insert the edge of the
cable.
11
11
1
22
22
2
33
33
3
Put the lid back down.
• Bundle the cables of the external
speakers with clamps as shown above.
CAUTION
• Make sure external speakers have 8 ohm and 10 watt
specifications.
• Connect the plus/minus jacks with the correct cables.
Incorrect connection may cause a short.