Filter
Top Products
44
Using external equipment
AVC System (rear view)
Digital TV tuner
Watching broadcasts via a Digital TV tuner
Connecting a Digital TV tuner
You can use the INPUT 3 terminal when connecting a Digital TV tuner and other audiovisual equipment.
Displaying broadcasts via a Digital TV tuner
To watch a Digital TV tuner image, select “INPUT3”
from the “INPUT SOURCE” menu using INPUT on the
remote control unit or on the Display. (See page 50.)
Then select “INPUT3” on “Input Select” in the “Option”
menu to set the correct input signal type. (See page
50.)
The setting is stored and can be selected on the
“INPUT SOURCE” menu.
NOTE
• Each time INPUT is pressed, the input source toggles.
• If the Digital TV tuner image does not come in clearly, you
may need to change the input signal type setting on the
“Input Select” menu.
• Refer to your Digital TV tuner operation manual for the
signal type.
• DVI-DIGITAL INPUT cannot connect to a PC. Input
resolution is compatible with 1080I, 720P, 480P and VGA
(60Hz).
• Use the PC INPUT terminals on the front of the AVC System
when connecting a PC. (See page 46.)
• When connecting to the DVI-DIGITAL INPUT terminal, be
sure to use a commercially available DVI cable with ferrite
core attached.
Component video cable
(commercially available)
S-video cable
(commercially available)
INPUT
TV
ANT-A/B
SURROUND
FRONT
TWIN
MODE
AV
POWER
MTS CC
PICTURE
SELECT
SUB TWIN CH
FREEZE
MODE
VIEW
SLEEP LEARN
EDIT/
DISPLAY
INPUT
TV VCRCBL
/SAT
/DTV
DVD
/LD
When using component
video cable, select
“COMPONENT” for
“Input Select” in the
menu.
DVI cable (commercially available)
When using DVI cable, select “DVI”
for “Input Select” in the menu.
INPUT SOURCE
TV
INPUT1
INPUT2
INPUT3
INPUT4
PC
TV MENU
Option
Input Select
Auto
COMPONENT
AV-Y/C
DVI
AV cable
(commercially available)
For INPUT3 signal