Sharp LC-40LE830U Flat Panel Television User Manual


 
8
LC-46LE830U/LC-52LE830U
1
Confi rm that there are 9 screws (4 long screws, 4
middle screws and 1 short screw) supplied with the
stand unit.
2
Attach the supporting post for the stand unit onto
the base as shown below.
The supporting post attaches to the base at an off-
centered location on the base. Be sure to attach the
supporting post in the direction indicated below and
attach the stand to the TV with the wider side of the
base facing forward.
2
1
Forward
Long screws
3
Insert the stand into the openings on the rear of the
TV.
Soft cushion
4
Insert and tighten the 4 screws into the 4 holes on
the rear of the stand unit.
Middle screws
5
1
Insert the stand cover.
2
Insert the screw to secure the stand cover.
2
1
Short screw
• To detach the stand, perform the steps in reverse
order.
LC-60LE830U
1
Confi rm that there are 10 screws (4 long screws, 4
middle screws and 2 short screws) supplied with the
stand unit.
2
Attach the supporting post for the stand unit onto
the base as shown below.
The supporting post attaches to the base at an off-
centered location on the base. Be sure to attach the
supporting post in the direction indicated below and
attach the stand to the TV with the wider side of the
base facing forward.
2
1
Forward
Long screws
3
Insert the stand into the openings on the rear of the
TV.
Soft cushion
4
Insert and tighten the 4 screws into the 4 holes on
the rear of the stand unit.
Middle screws
5
1
Insert the stand cover.
2
Insert the 2 screws to secure the stand cover.
2
1
Short screws
• To detach the stand, perform the steps in reverse
order.
QUICK REFERENCE