Sharp LC-40LE830U Flat Panel Television User Manual


 
63
Using the Internet
H
If you cannot connect to the Internet
Perform the procedures below to check your TV's
network settings.
IP Setup
1
Press EXIT to display the normal TV screen.
2
Press MENU to display the MENU screen, and then
press
c
/
d
to select “Initial Setup”.
3
Press
a
/
b
to select “Internet Setup”, and then
press ENTER.
4
Press
a
/
b
to select “Network Setup”, and then
press ENTER.
5
Press
a
/
b
to select “IP Setup”, and then press
ENTER.
Check that numbers are displayed for each setting.
If there are any settings without numbers, specify the
numbers by following the on-screen instructions.
For information on how to enter text, see page 64.
Example
Initialize
Change
IP Address : Auto Setup
Netmask : Auto Setup
Gateway : Auto Setup
DNS : Auto Setup
Proxy : No Use
MAC Address : XX:XX:XX:XX:XX:XX
Setting IP information
[Current Setup]
6
Press MENU to exit.
Setting the Country
1
Repeat steps 1 to 4 in IP Setup.
2
Press
a
/
b
to select "Country", and then press
ENTER.
3
Press
a
/
b
to select "US", "Canada", "Mexico" or
"Others", and then press ENTER.
If you select “Others”, you need to set the desired area.
4
Press MENU to exit.
Setting the Zip Code
1
Repeat steps 1 to 4 in IP Setup.
2
Press
a
/
b
to select “Zip Code”, and then press
ENTER. After “Change” is highlighted, press
ENTER again.
3
Enter your zip code.
Use 0-9 on the remote control unit, or use the software
keyboard.
4
After “Complete” is highlighted, press ENTER.
5
Press MENU to exit.
Displaying Updated Information and
Support Service
This function can be used to display up-to-date
information on the original home page and allow you to
receive support service over the network.
Original Home Page
1
Press AQUOS NET once or twice.
You can also display the original home page by
pressing FAV APP on the remote control unit. See
page 35 for details on the FAV APP key Assign
function.
Each time you press AQUOS NET, the screen image
toggles as shown below:
TV+Web Web T
V
When you are not connected to the Internet, a network
function explanation screen is displayed.
The services displayed vary depending on circumstances.
2
Press
a
/
b
/
c
/
d
to select a title, and then press
ENTER.
The service details vary depending on circumstances.
3
Press EXIT to return to the normal TV screen.
Web page appearances may differ depending on the type
of screen (TV+Web or Web).
When displaying TV+Web with a channel in which the
V-Chip is enabled, the cursor keys on the remote control
unit do not function.
AQUOS Advantage Live
1
Press APPS to display the application window.
2
Press
c
/
d
to select “AQUOS ADVANTAGE LIVE”,
and then press ENTER.
You can also display the AQUOS ADVANTAGE LIVE
screen by pressing FAV APP on the remote control
unit. See page 35 for details on the FAV APP Key
Assign function.
3
Press
a
/
b
/
c
/
d
to select the desired service.
4
Press EXIT to return to the normal TV screen.
The display may change as a result of a software update.