Filter
Top Products
21
On-Screen Display Menu
OPC Setting
Automatically adjusts the brightness of the screen.
Off: The brightness is fi xed at the value set in
"Backlight".
On: Automatically adjusts.
On:Display: Displays the OPC effect on the screen
while adjusting the brightness of the screen.
NOTE
• When set to "On", the Optical Picture Control (OPC)
senses the surrounding light and automatically adjusts
the backlight brightness. Make sure nothing obstructs
the OPC sensor, which could affect its ability to sense
surrounding light.
• When set to "On:Display", OPC effect displays on the
screen while the OPC adjusts the screen brightness.
OPC:
OPC:
Advanced Picture Settings
This TV provides various advanced functions for
optimizing the picture quality.
Resolution
Adjusts the fi neness (resolution) of the picture in the
range 0 to +10.
NOTE
• "Resolution" is not available when you set AV MODE to
"PC", "3D" or "GAME (3D)".
• When using any of the HDMI IN 1 to 4 terminals and
inputting a 3840 x 2160 signal, you cannot select
"Resolution".
Focus
Adjusts the sharpness (crispness) of the picture in
the range 0 to +10.
NOTE
• "Focus" is not available when you set AV MODE to
"PC", "3D" or "GAME (3D)".
• When using any of the HDMI IN 1 to 4 terminals and
inputting a 3840 x 2160 signal, you cannot select
"Focus".
Picture Settings
Adjusts the picture to your preference with the
following picture settings.
NOTE
• For operating the on-screen display menu, see page 19.
Selected item
c
button
d
button
Backlight The screen
dims
The screen
brightens
Contrast For less
contrast
For more
contrast
Brightness For less
brightness
For more
brightness
Color For less color
intensity
For more color
intensity
Tint Skin tones
become
reddish
Skin tones
become
greenish
Sharpness
For less
sharpness
For more
sharpness
• For resetting all Picture adjustment items to the factory
preset values, press
a
/
b
to select "Reset", press
ENTER, press
a
/
b
to select "Yes", and then press
ENTER.
AV MODE (Changing Pic.Quality)
The audio and video settings can be changed to suit
the program or input content being watched.
NOTE
• The selectable items vary depending on the input
source.
• For details of the selectable items in 3D mode, see
page 31.
• You can select AV MODE by pressing AV MODE on
the remote control unit. See page 16 for details of AV
MODE settings.
THX Room Mode Setting
Adjust the picture to room illumination or ambient
brightness. This function is available only when AV
MODE is set to "MOVIE THX".
Bright room: Select this item for a bright room.
Dark room: Select this item for a dark room.
Color Temp. (Color Temperature)
For a better white balance, use color temperature
correction.
High: White with bluish tone
Mid-High:
Middle:
Mid-Low:
Low: White with reddish tone
Low (Xenon), Low (Carbon arc): Available only
when AV MODE is set to "MOVIE" MODE. Use
one of these items to make picture color become
more reddish.
White balance can be adjusted between a maximum of
+30 and a minimum of –30 for each color temperature.
R Gain (LO/HI)/G Gain (LO/HI)/B Gain (LO/HI)
■
Fine tuning the color temperature
To fi ne tune the color temperature, set "10 Point
Setting" to "On".
You can adjust the "Position" setting. Adjust the set
color temperature from +1 to +10.
White balance can be adjusted between a maximum
of +30 and a minimum of –30 for each color
temperature.
NOTE
• When "Position" is set to "10", you can adjust the white
balance between –30 and 0.
• For resetting all adjustment items to the factory preset
values, press
a
/
b
to select "Reset", and then press
ENTER.
Motion Enhancement
Use Motion Enhancement to view fast-action video
more clearly.
Selected item Description
AquoMotion240
Turn the LED backlight on or
off for 120Hz drive display.
120Hz High
For obtaining a clearer image.
120Hz Low
Off
Original image.
NOTE
• "Motion Enhancement" may cause image noise. If this
occurs, turn the function "Off".
• When AV MODE is set to "GAME" or "PC", or PC
format is being input, "Motion Enhancement" is not
available.
Multiple Pixel Drive
Set this function when two or more people are going
to watch a TV program or when you are viewing the
screen obliquely.
On: For wider viewing angle.
Off: Normally choose this.
Gamma Adjustment
Adjusts the differences of picture tones between
bright parts and dark parts. The adjustment range
of the gamma can be set to a maximum of +3 and a
minimum of –3 by pressing
c
or
d
.
Black Level
Adjusts on-screen black level to your preferred level.
High: The black level gets brighter.
Low: The black level gets darker.
NOTE
• "Black Level" is available for input signal from
Composite Video, Component 480i and analog
broadcasts (air and cable).
Film Mode (3:2 pull-down)
This function provides high-quality playback of
images originally encoded at 24 frames/second,
such as fi lms.
Advanced High: Provides smoother image motion
while ensuring high-quality playback.
Advanced: Adjusts effect to reduce judder from fi lm
contents.
Standard: Plays back images with equal display
time for each frame, reproducing movie theater
experience.
Off: Normal viewing mode.
NOTE
• "Film Mode" does not function depending on input
signal type.
• "Film Mode" does not function when you set AV MODE
to "GAME" or "PC".
• "Standard" does not function depending on input
signal type.