Sharp LC-32D40U Flat Panel Television User Manual


 
16
Simple button operations for
changing channels
You can change channels in several ways.
NOTE
When selecting a 1-digit channel number, it is not
necessary to press 0 before the number.
When you enter 0-9 only, channel selection will be made
if there is no operation within a few seconds.
To select a 3-digit channel number
(e. g., Channel 115):
Press 1
1
5
ENT
To select a 4-digit channel number
(e. g., Channel 22.1):
Press 2
2
• (DOT)
1
ENT
NOTE
When you enter 0–9 only, channel selection will be made
if there is no operation within a few seconds.
If you push “0” by itself, nothing will happen.
Complete the above steps within a few seconds.
When you enter 0–9 and (DOT), channel selection will
be made if there is no operation within a few seconds.
Method 1
Using CH
/ on the remote control unit or on the
TV.
Method 2
1 Press FLASHBACK to switch to the previously
tuned channel.
2 Press FLASHBACK again to switch back to the
currently tuned channel.
NOTE
FLASHBACK will not work if no channel has been
changed after the TV is turned on.
Method 3
Using remote control buttons 0-9, • (DOT) to select
channels for VHF/UHF/CATV/DIGITAL.
To select a 1 or 2-digit channel number
(e. g., Channel 5):
Press 5
ENT
Watching TV
3Y10101A.indb 163Y10101A.indb 16 2006/01/19 20:30:302006/01/19 20:30:30