Sharp LC-32D40U Flat Panel Television User Manual


 
29
SLEEP
0h07m
SLEEP
0h00m
SLEEP
0h10m
(Sleep timer off)
step up by 10 minutes
SLEEP
1h50m
SLEEP
2h00m
Sleep timer
Allows you to set a time when the TV automatically
switches to standby.
2
1
Audio output select
Allows you to select what controls the audio output.
Press
/
to select “ON” or “OFF”.
Press MENU and the MENU screen
displays.
Press / to select (AUDIO).
Press / to select “SPEAKERS”.
1
2
4
3
Selected item
ON
OFF
Description
Sound via speaker is adjusted with
VOL +/
on the remote control unit or
VOL
/+ on the TV.
Sound via the AUDIO OUTPUT
terminal is not adjustable and outputs
at a consistent level.
Sound via the AUDIO OUTPUT
terminal is adjusted with VOL +/
on
the remote control unit or VOL
/+ on
the TV.
Sound via speaker is muted.
AUDIO
MTS STEREO
BASS 25
TREBLE 25
BALANCE 0
SPEAKERS ON/OFF
:SELECT :ADJUST
Useful adjustment settings
Each time you press SLEEP, the remaining
time setting switches as shown below.
Press SLEEP.
The remaining time displays when the sleep
timer has been set.
This display will disappear after a few
seconds, the sleep timer automatically
starts counting down.
If you want to adjust the sleep timer again, you
can press SLEEP repeatedlly then change the
time setting.
NOTE
Select “0h00m” by pressing SLEEP repeatedly to cancel
the sleep timer.
The TV will enter the standby mode when the remaining
time reaches zero.
Press EXIT to return to the normal screen.
5
3Y10101A.indb 293Y10101A.indb 29 2006/01/19 20:30:372006/01/19 20:30:37