Sharp LC-32D40U Flat Panel Television User Manual


 
18
AUDIO
MTS STR/SAP/MONO
BASS 25
TREBLE 25
BALANCE 0
SPEAKERS ON
:SELECT :ADJUST
Setting MTS/SAP stereo mode
The TV has a feature that allows reception of sound
other than the main audio for the program. This
feature is called Multi-channel Television Sound
(MTS). The TV with MTS can receive mono sound,
stereo sound and Secondary Audio Programs (SAP).
The SAP feature allows a TV station to broadcast
other information, which could be audio in another
language or something completely different like
weather information.
You can enjoy Hi-Fi stereo sound or SAP
broadcasts where available.
Stereo broadcasts
View programs like live sporting events, shows and
concerts in dynamic stereo sound.
SAP broadcasts
Receive TV broadcasts in either MAIN or SAP sound.
MAIN sound: The normal program soundtrack (either in
mono or stereo).
SAP sound: Listen to a second language, supplementary
commentary or other information. (SAP is mono sound.)
If stereo sound is dif cult to hear.
• Obtain a clearer sound by manually switching to
xed mono-sound mode.
NOTE
MTS only operates while in TV mode.
When the TV receives a stereo or SAP broadcast, the
word “STEREO” or “SAP” displays on-screen every
time you turn the TV on, change the channel, or press
DISPLAY.
Watching TV
Press AUDIO and the (AUDIO) menu
screen displays. “MTS” will be highlighted.
Press EXIT to return to the normal screen.
Press AUDIO again or / to select “STR
(STEREO)”, “SAP” or “MONO”.
1
2
3
Setting WOW
TM
surround sound
WOW is a special combination of SRS Labs audio
technologies that creates a thrilling surround sound
experience with deep, rich bass from stereo sound
sources. Your TV’s audio will sound fuller, richer,
and wider. WOW consists of three features; SRS 3D,
FOCUS, and TruBass.
Select STEREO mode (see “Setting MTS/
SAP stereo mode” on this page).
Press SURROUND and the (AUDIO)
menu screen displays. "WOW SRS 3D" will
be highlighted.
1
2
Press / to select the desired WOW
feature you want to adjust.
3
AUDIO
WOW SRS 3D ON/OFF
FOCUS OFF
TruBass OFF
HDMI HDMI
:SELECT :ADJUST
SRS 3D: Press / to turn on or off the
surround sound effect.
FOCUS: Press / to turn on or off the vocal
emphasis effect.
TruBass: Press / to select the bass
expansion effect high, low or off.
After your desired setting, press EXIT to
return to the normal screen.
4
NOTE
You can enter to the same menu screen from
(AUDIO) menu.
Changing MTS
You can change MTS as shown below to match the
television broadcast signal.
3Y10101A.indb 183Y10101A.indb 18 2006/01/19 20:30:312006/01/19 20:30:31