Sharp LC 37GD6U Flat Panel Television User Manual


 
15
LC-37GD6U
LC-32GD6U
LC-26GD6U
Part names
Display
* Press RESET if the system cannot return to its
original state after performing various operations.
AV MODE resets to DYNAMIC (Fixed)
TV channel returns to initial channel (Air:2ch, Cable:1 or 2ch)
Twin picture resets to normal
Audio setting initializes
Dolby virtual resets to off
Image position initializes
** Press SYSTEM RESET if the system does not operate after starting up.
NOTE
Pressing RESET will not work if the System is in standby mode.
Pressing RESET will not delete channel preset or secret number. See page 66 for clearing the secret number when you
know it. See page 100 for initializing to the factory preset values when you forget your secret number.
RESET*
INPUT 3
terminals
SYSTEM RESET**
ANALOG A IN terminal
ANALOG B IN terminal
ANALOG A OUT terminal
DC OUTPUT
terminal
(Terminal for expanded
functionality in the near
future.)
EXTERNAL SPEAKER terminals
AC INPUT
terminal
RS-232C
terminal
INPUT 2 terminals
INPUT 1
terminals
INPUT 5 terminals INPUT 4 terminal
DIGITAL AUDIO OUTPUT
terminal
CENTER CHANNEL
INPUT terminal
MONITOR OUTPUT
terminals
i.LINK terminals
CableCARD slot
DIGITAL IN terminal
* This terminal
looks different on
the LC-26GD6U.
INPUT 3
terminals
INPUT 1
terminals
MONITOR
OUTPUT
terminals
INPUT 2 terminals