Sharp LC 37GD6U Flat Panel Television User Manual


 
71
Useful adjustment settings
Description
Sound via speaker is adjusted with VOL
k/l on the remote control unit or VOL l/
k on the Display.
Sound via the MONITOR OUTPUT terminal
is not adjustable and constantly outputs.
Sound via the MONITOR OUTPUT terminal
is adjusted with VOL k/l on the remote
control unit or VOL l/k on the Display.
Sound via speaker is muted.
Selected item
Fixed
Variable
Output Select
Allows you to select what controls the audio output.
Press MENU and the MENU screen displays.
1
2
Press a/b to select “Output Select”, and
then press ENTER.
3
Press c/d to select “Fixed” or “Variable”,
and then press ENTER.
4
Press c/d to select “Option”.
Quick Shoot
Use Quick Shoot Operation to record action video more
clearly.
1
2
3
Repeat steps 1 and 2 in Output Select.
Press a/b to select “Quick Shoot”, and then
press ENTER.
Press c/d to select “On”, and then press
ENTER.
NOTE
Quick Shoot may cause image noise. If this occurs turn
the function “Off”.
Sleep timer
Allows you to set a time when the TV automatically
switches to standby.
Sleep Timer: Off
30
60
90
120
Sleep Timer:
Sleep Timer:
Sleep Timer:
Sleep Timer:
1
2
Press SLEEP.
Remaining time displays when sleep timer has
been set.
Each time you press SLEEP, the remaining
time switches as shown below.
When set, the time automatically starts counting
down.
If you want to adjust the sleep timer, you can
press SLEEP twice then change the time
setting.
Five minutes before time expires, the remaining
time displays each minute.
NOTE
Select “OFF” by pressing SLEEP to cancel the sleep timer.
If the sleep timer is activated when set to zero, the TV will
enter STANDBY mode.
Sleep Timer: Remaining
30