Sharp LC 37SH20U Flat Panel Television User Manual


 
26
DisableEnable
PCM
Dolby Digital
Press MENU to exit.
5
Power Control
Power control setting allows you to save energy.
No signal off
When set to “Enable”, the power will automatically shut
down if there is no signal for 15 minutes.
Audio Setup
You can output digital audio to an AV amplifi er or
similar device whose DIGITAL AUDIO INPUT terminal
is connected to the DIGITAL AUDIO OUTPUT terminal
on the TV. Please select an audio output format
compatible with the audio format of the program you
are watching and the equipment connected.
NOTE
“Disable” is the factory preset value.
When a TV program fi nishes, this function may not operate.
NOTE
“Disable” is the factory preset value.
Press
a
/
b
to select “PCM” or “Dolby
Digital”, and then press ENTER.
Press MENU and the MENU screen displays.
Press
c
/
d
to select “Power Control”.
Press
a
/
b
to select “No Signal Off”, and
then press ENTER.
Press
c
/
d
to select “Enable”, and then
press ENTER.
Five minutes before the power shuts down, the
remaining time displays every minute.
No operation off
When set to “Enable”, the power will automatically shut
down if there is no operation for 3 hours.
Repeat steps 1 and 2 in No signal off.
Press
a
/
b
to select “No Operation Off”, and
then press ENTER.
Press
c
/
d
to select “Enable”, and then
press ENTER.
Five minutes before the power shuts down, the
remaining time displays every minute.
Digital Setup
This setting allows you to optimize the settings of
Digital broadcasting.
Press MENU and the MENU screen displays.
Press
c
/
d
to select “Digital Setup”.
Press
a
/
b
to select “Audio Setup”, and then
press ENTER.
Basic adjustment settings
1
2
4
3
1
2
3
1
2
4
3
Selected item
PCM
Dolby Digital
Description
The optical output terminal outputs
audio signal in PCM form. If your
digital audio system does not support
Dolby Digital, select “PCM”.
The optical output terminal outputs
audio signal in Dolby Digital form.
It reproduces sound from surround
program of digital.
Press MENU to exit.
4
Press MENU to exit.
5