Sharp LC 37SH20U Flat Panel Television User Manual


 
6
Supplied accessories
NOTE
Always use the AC cord supplied with the TV.
Make sure the following accessories are provided with the product.
Remote control unit (
g
1)
Page 8 Page 8 Page 7
Page 7 Page 7
“AA” size battery (
g
2) AC cord (
g
1)
Cable Clamp (
g
1) Cable tie (
g
1)
Operation manual (
g
1)
Stand unit (
g
1)
Page 6
1. Confi rm the 8 screws supplied with the TV.
NOTE
To detach the stand, perform the steps in reverse order.
2. Attach the two parts of the stand unit to each other using
the 4 short screws and the hex key (supplied with the
product) as shown.
3.
1
Insert the stand into the opening on the bottom of the
TV.
2
Insert and tighten the 4 long screws into the 4 holes on
the rear of the TV.
Attaching the stand
• Before attaching (or detaching) stand, unplug the AC cord from the AC INPUT terminal.
• Before performing work spread cushioning over the base area to lay the TV on.
This will prevent it from being damaged.
Short screws (
m
4)
(used in step 2)
Long screws (
m
4)
(used in step 3)
1
2
QUICK REFERENCE
Hex key
Hex key
Short screw
Soft cushion
Long screw
CAUTION
Attach the stand in the correct direction.
The “REAR” label should be visible from the back of the TV. Refer to
the fi gure.
Incorrect installation of the stand may result in the TV falling over.
Be sure to follow the instructions.
REAR
This side faces the rear.