Filter
Top Products
E23
EnglishDeutschFrançaisItalianoEspañolEnglish
Setting TV channels
The following table shows the channels this TV
can receive.
VHF Channels 2 through 13
UHF Channels 14 through 69
Cable
Channel 1 (HRC and IRC mode only)
Channels 2 through 125 (STD, HRC, and IRC)
(You must subscribe to a cable TV service to
receive cable channels.)
TV memory for channels is empty at shipment. To
receive channels, use the CHANNEL SETTING
menu.
Note:
- Release the adjustment lock (see page E56) if it
has been set. You cannot use the CHANNEL
SETTING menu while the adjustment lock is set.
Channel setting methods
There are two ways to set channels.
Automatically setting channels you can receive
(CHANNEL SEARCH)
The TV will automatically set the channels it can
receive in your area.
Setting channels one at a time
(CHANNEL MEMORY)
This method is for manually setting the channels
you want one by one. Use this method if you want
to add other channels after using "CHANNEL
SEARCH".
Displaying the CHANNEL SETTING menu
POWER
Virtual
PC AV2AV1TV
SLEEP
ENTER
MENU
BRIGHT
FREEZE
VIEW MODE
MULTI
BRIGHT
MODE
1.Press the POWER button on the TV to turn on the
TV.
When the power LED lights red, press the
POWER button on the remote control.
2.Press the TV button to select TV mode.
A channel number will appear in the upper-right
corner of the screen.
3.Press the MENU button to display the MENU
screen.
MENU
<
TV/AV
>
VIDEO ADJUST
>>
AUDIO ADJUST
>>
CHANNEL SETTING
>>
SCREEN ADJUST
>>
MODE SELECT
>>
CLOSED CAPTION
>>
V-CHIP BLOCK
>>
4.Press the
buttons to select "CHANNEL
SETTING", and press the ENTER button.
The CHANNEL SETTING menu will be
displayed.
CHANNEL SETTING
<
TV/AV
>
RETURN
AIR/CABLE
[
AIR
]
CABLE MODE
[
STD
]
CHANNEL SEARCH
>>
CHANNEL MEMORY
>>
LD-23SH1U_gb_01.P65 2005/01/20, 20:2223