Filter
Top Products
E27
EnglishDeutschFrançaisItalianoEspañolEnglish
Common operations
Turning power on/off
POWER
Virtual
PC AV2AV1TV
SLEEP
ENTER
MENU
BRIGHT
FREEZE
VIEW MODE
MULTI
BRIGHT
MODE
Turning power on
When the power LED is off:
1.Press the POWER button on the TV.
2.Turn on power for the connected equipment.
After a while the power LED will light green, and
then the display mode will be displayed for
several seconds.
When the power LED is lit red (standby):
1.Press the POWER button on the remote control.
2.Turn on power for the connected equipment.
The power LED will light green, and then the
display mode will be displayed for several
seconds.
Turning off power
1.Turn off power for the connected equipment.
2.Press the POWER button on the remote control.
The power LED will light red (standby).
3.Press the POWER button on the TV.
The power LED will go out.
Notes:
- Always wait at least 5 seconds between
switching power off/on. Rapid switching may
damage the TV or cause it to malfunction.
- After switching power on, it may take a little
while before the screen displays an image.
- Do not turn off the power immediately after
changing various settings on the screen. The
changed values may not have been saved in the
memory yet.
Switching display modes (INPUT)
POWER
Virtual
PC AV2AV1TV
SLEEP
ENTER
MENU
BRIGHT
FREEZE
VIEW MODE
MULTI
BRIGHT
MODE
1.Press the PC, TV, AV1, or AV2 button.
The TV will switch to the display mode for the
button you pressed.
Each time you press the PC button, the input
toggles between analog and digital.
10
STEREO
Display modes
Number
TV mode Displays the TV's image.
The number is the
channel being received.
AV1
AV1 mode Displays the image from
the equipment connected
to the AV1 input.
AV2
AV2 mode Displays the image from
the equipment connected
to the AV2 input.
PC PC mode
Displays the computer's
(analog/digital) image.
LD-23SH1U_gb_01.P65 2005/01/20, 20:2227