Filter
Top Products
Switching the Angle
DVD VIDEO
BD VIDEO
If multiple angles are recorded, you can switch
between them.
Press FUNCTION during playback.
The Function Control screen is displayed on the TV.
Press a/b to select the Angle Number column,
then press ENTER.
BD-VIDEO
0 0: 2 0 : 3 0
1
1/3
5 . 1 c h
5 5 / 2
2 English
1
Off
Press a/b to select the desired Angle Number,
then press ENTER.
“–” is displayed if a disc is recorded with only one
angle.
Press n RETURN or FUNCTION to close the
Function Control screen.
NOTE
The displayed items vary depending on the disc.
If you access the Function Control screen during playback
of a BD/DVD video, it may be impossible to operate the
BD/DVD video playback. In cases like this, close the
Function Control screen.
The operation of angles differs according to each disc. You
may need to refer to the operation manual of the disc.
The display for angle information automatically disappears
after 5 seconds.
•
•
•
•
1
•
2
3
•
4
Displaying the Angle Mark
DVD VIDEO
BD VIDEO
You can change settings so that Angle Mark appears
in the right bottom part of the screen when multiple
angles are recorded. The settings can be changed in
“Settings” – “Playback Setting” – “Angle Mark Display”
(Page 43).
Playback Functions
37
Playback