Filter
Top Products
!
"&
Direct Button Operation
• Each time INPUT is pressed, the
input source toggles.
• If you press
*
/
+
to select the
input source, press ENTER to
confirm your selection.
• See page 20-23 for external equipment
connection.
MUTE
Mutes the current sound output.
Press MUTE.
• Mute can be canceled by using the
method below.
- Mute will be canceled if you press
VOL
,-.!
or MUTE.
SLEEP
Allows you to set a time when the TV
automatically switches to standby.
Press SLEEP.
• The remaining time displays when
the sleep timer has been set.
• E ach time you press SLEEP, the
remaining time switches as shown
below.
Off, 10, 20, 30, 40, 50, 60, 90, 120
• When set, the time automatically
starts counting down.
• If you want to adjust the sleep
timer, you can press SLEEP twice
then change the time setting.
• One minute before the time
expires, the remaining time
displays every second.
• Select "Off" by pressing SLEEP to
cancel the sleep timer.
• The TV will enter standby mode (power
indicator lights red) when the remaining
time reaches zero.
Changing Channels
You can change channels by pressing
CH
"
/
#
or 0-9, or • (DOT).
Examples:
To select a 1 or 2-digit channel number (e.
g., Channel 5):
Press 5 ENT.
To select a 3-digit channel number (e. g.,
Channel 115):
Press 1 1 5 ENT.
To select a 4-digit channel number (e. g.,
Channel 22.1):
Press 2 2 • (DOT) 1
ENT.
• When selecting a 1-digit channel
number, it is not necessary to press 0
before the number.
Changing Volume
You can change the volume by pressing
VOL
(
/
)
on the TV or on the remote
control unit.
• To increase the volume, press
VOL
(
.
• To decrease the volume, press
VOL
)
.
INPUT
To view external source images, select the
input
source using INPUT on the remote
control unit or INPUT on the TV.
1. Press
INPUT.
• A list of selectable sources
appears.
2. Press
INPUT
again to select the input
source.
• An image from the selected source
automatically displays.