Filter
Top Products
42
When selecting the AUDIO OUT
• You can select the formats of audio signals to be output from the HDMI OUTPUT connector as well as the 5.1CH/2CH AUDIO
OUTPUTs depending on the audio format recorded in the disc. (For details, refer to “Audio output from the unit’s HDMI
OUTPUT and 5.1CH/2CH AUDIO OUTPUTs” on page 10.)
• Regardless of AUDIO OUT setting, the digital audio signals can be output from the DIGITAL OUTPUTs as they were recorded
in a digital audio format. However, there are some exceptions depending on the digital audio format recorded in disc.(For
details, refer to “Connecting DIGITAL OUTPUTs” and “Audio output from the unit’s DIGITAL OUTPUTs” on page 7.)
• When the HDMI OUTPUT connector is connected to an HDMI-compatible TV, the TV reports to this unit what audio formats it
supports. Therefore, if the AUDIO OUT is set to HDMI AUTO, this unit outputs either the audio signals as they were recorded
in a digital audio format or the 2 channel linear PCM signals.
• Some TVs may not report their digital audio format information. In this case, if the AUDIO OUT is set to HDMI AUTO, the 2
channel linear PCM signals will be automatically output.
• If your TV doesn’t support Dolby Digital, DTS, etc., you should set the AUDIO OUT to MULTI CH or STEREO depending on
the audio format that it can support.(For details on the audio format, refer to the operating instruction of your TV.)
Notes:
• To output the signals from the HDMI OUTPUT connector, you should set the HDMI OUTPUT to ON.
• Lt/Rt can be selected only when the HDMI OUTPUT to OFF.(Refer to “When selecting the HDMI OUTPUT” on page 33.)
• The audio signals from the DVD Audio with CPPM cannot be output from the HDMI OUTPUT connector. To hear these
signals, make the analog connection.
• Depending on the AUDIO OUT setting, the analog audio signals can be output from the 5.1CH/2CH AUDIO OUTPUTs.
• Depending on how to connect the analog AUDIO OUTPUT jacks to your amplifier/receiver or TV, you should set the AUDIO
OUT correctly as follows:
* When outputting the multichannel audio signals from the 5.1CH AUDIO OUTPUTs as they were recorded, set the AUDIO OUT to HDMI AUTO
or MULTI CH.
* When enjoying conventional 2 channel stereo sound by connecting the unit’s 2CH AUDIO OUTPUTs(or the A/V SCART OUTPUT connector)
to a stereo amplifier/receiver/TV, set it to STEREO.
* When enjoying multichannel surround sound by connecting the unit’s 2CH AUDIO OUTPUTs(or the A/V SCART OUTPUT connector) to an
A/V amplifier/receiver with built-in surround decoder.
Notes:
• When the AUDIO OUT is set to HDMI AUTO or MULTI CH, only the front left and right signals of the multichannel audio
signals will be output from the 2CH AUDIO OUTPUTs(and the A/V SCART OUTPUT connector).
• When the AUDIO OUTPUT is set to STEREO or Lt/Rt, 2 channel signals will be output from only the FL and FR jacks of
5.1CH AUDIO OUTPUTs, too.
Continued
1
Press the CURSOR / buttons to select the AUDIO OUTPUT, then press the ENTER button.
AUDIO OUTPUT
AUDIO OUT
LATE NIGHT
DVD AUDIO AREA
SACD AREA
EXIT
HDMI AUTO
MULTI CH
STEREO
Lt/Rt
Item
menu
Setting menu
RCRC
When selecting the AUDIO OUTPUT
2
Press the CURSOR / buttons to select the preferred item.
• Then the setting menu of the selected item is displayed.
RC
AUDIO OUTPUT
AUDIO OUT
LATE NIGHT
DVD AUDIO AREA
SACD AREA
EXIT
HDMI AUTO
MULTI CH
STEREO
Lt/Rt
• HDMI AUTO : When outputting either the audio signals as they were recorded in
a digital audio format from the HDMI OUTPUT connector or
the 2 channel linear PCM signals.
• MULTI CH : When converting Dolby Digital or DTS signals to multi-channel linear
PCM signals and outputting them from the HDMI OUTPUT connector.
• STEREO : When downmixing Dolby Digital or DTS signals into 2 channel linear
PCM signals and outputting them from the HDMI OUTPUT connector.
• Lt/Rt : When outputting no audio signals from the HDMI OUTPUT connector.