Sherwood SD-871 DVD Player User Manual


 
43
Continued
󳂮When selecting the LATE NIGHT
This function compresses the dynamic range of previously specified parts of the Dolby Digital sound track(with extremely high
volume) to minimize the difference in volume between the specified and non-specified parts.
This makes it easy to hear all of the sound track when watching movies at night at low levels.
This function can be activated while playing the Dolby Digital program sources only.
󳂮When selecting the DVD AUDIO AREA
Some DVD Audio discs consist of DVD Video and DVD Audio contents. You can select the desired area to be played.
(For details, see the discs sleeve notes.)
Note : When the disc dose not contain the selected one at this menu, the available one will be played regardless of the DVD
AUDIO AREA setting.
󳂮When selecting the SACD AREA
Some SACDs consist of 2 channel and multichannel audio areas, and hybrid SACDs comprise 2 layer structure of an
HD(SACD) layer and CD layer. You can select the desired area/layer to be played.(For details, see the discs sleeve notes.)
You can select the desired area/layer with pressing the SACD AREA button, too. (For details, refer to To select a playback
area/layer on page 18.)
Note : When the disc does not contain the selected one at this menu, that cannot be played. Therefore you should select the
desired of the available ones.
1~8 : When adjusting the dynamic range compression as desired.
0 : When turning off the dynamic range compression.
Note: In some Dolby Digital softwares, this function cannot be available.
8
7
6
5
4
3
2
1
0
AUDIO OUTPUT
LATE NIGHT
DVD AUDIO AREA
SACD AREA
EXIT
MULTICHANNEL : When playing the multichannel area (of HD layer).
2CHANNEL : When playing the 2 channel area (of HD layer).
CD AREA: When playing the CD layer.
SACD AREA
EXIT
MULTICHANNEL
2CHANNEL
CD AREA
DVD AUDIO : When playing the DVD Audio content.
DVD VIDEO : When playing the DVD Video content.
DVD AUDIO AREA
SACD AREA
DVD AUDIO
DVD VIDEO
5
Press the CURSOR button to select the item menu.
RC
RCRC
3
Press the CURSOR button to select the setting menu.
4
Press the CURSOR /buttons to select the preferred setting, then press the ENTER button.
RC
Each time the CURSOR or button is pressed, the
setting menu or the item menu is selected.
The selected setting is colored.
Each time the CURSOR or button is pressed, the
item menu or the setting menu is selected.