Filter
Top Products
59
HDMI troubleshooting
• This unit has been designed to be compliant with HDMI(High Definition Multimedia Interface) version 1.0.
Depending on the component you have connected, unreliable signal transfers may result.
In addition, some functions of this unit may be limited.
(For details, refer to the operating instructions of the connected TV, etc.)
PROBLEM POSSIBLE CAUSE REMEDY
No picture and sound
No picture or abnormal
picture
No sound or abnormal
sound
• The HDMI cord (or HDMI-DVI converter cord) is
disconnected.
• The incorrect selection of input source on the TV.
• The video and audio signals are not output from the
HDMI OUTPUT connector.
• This unit is playing a DVD Audio with CPPM.
• This unit is connected to TV that does not support
HDCP(High-bandwidth Digital Content Protection).
• HDMI FORMAT and VIDEO OUTPUT settings do not
match those the connected TV.
• The PURE AUDIO indicator lights up on the front
panel.
• The HDMI OUTPUT connector of this unit is
connected to the DVI INPUT connector of TV, etc.
• This unit plays a SACD
• The AUDIO OUT is set incorrectly.
• Connect the cord correctly.
• Select the input source correctly.
• Set the HDMI OUTPUT to ON.(Refer to “When
selecting the HDMI OUTPUT” on page 33.)
• The HDMI OUTPUT connector does not output the
video and audio signals of it.
• This unit will not transfer the video signals to TV that
does not support HDCP.
This is not malfunction.
• Set them correctly depending on the connected TV.
(Refer to “When selecting the HDMI FORMAT” on
page 33 and “When selecting the VIDEO OUTPUT”
on page 34.)
• Turn off the pure audio function.
• The DVI connector does not accept audio signals.
• The HDMI OUTPUT connector does not output the
audio signals of HD(SACD) layer.
• Set it correctly.
(Refer to “When selecting the AUDIO OUT” on page
42.)
Continued