Filter
Top Products
11
To Assign a Timer:
1. Press TIMER button once to select Timer mode.
2. Press [1 – 9] to select the desired timer, i.e. Enter [1] for Timer 1.
3. Press [PROG] to select between assigning this timer for:
a. Individual Light / Device
b. Zone
c. Scene
You can press [PROG] multiple times until the desired setting.
4. Use the Up [2] / Down [8] Button to select the Device Number / Zone Number /
Scene Number [1-9] that you want the timer to activate.
5. Use the Right [6] Button to select between On / Off. You can always go back
to step 4 by pressing the Left [4] Button.
6. Press Enter [5] to conrm the setting.
Repeat the above steps to setup different timer operations.