Filter
Top Products
22
DVR4400 DVD+VCR
Set Clock Manually
If Auto Clock Set is not available in your area, follow these steps to set the clock
manually.
1 Press SETUP/ENTER.
2 Press
Y/B and " to select Clock Setup Menu.
3 Press
Y/B and " to select and set Auto Clock Set to OFF. Time Zone and
Clock Set Channel will be removed from the menu.
4 Press
Y/B and " to select Set Clock. Set the date and time as follows:
SET MONTH Enter the month as a 2-digit number; e.g., for January, press
01.
SET YEAR Enter the year as a 2-digit number; e.g., for 2002, press 02.
SET DAY Enter the day as a 2-digit number; e.g., for the ninth, press 09.
SET HOUR Enter the hour as a 2-digit number; e.g., for 12:00, press 12.
SET MINUTE Enter the minutes as a 2-digit number; e.g., for 12:00, press 00.
SET AM/PM Press 1 for AM or 2 for PM.
• To correct an entry, press CLEAR, and then re-enter the numbers.
• To skip an entry without changing it, press the RIGHT arrow key.
• You can also use the UP/DOWN arrow keys to set each option.
5 Press RETURN to save and exit the menu system.
• If Auto Clock Set is available but has set the time incorrectly,
try adjusting Daylight Savings Time and Time Zone before set-
ting the clock manually.