Filter
Top Products
30
DVR4400 DVD+VCR
:: Rating Control Setup
Set/Change Rating Level
1 Press SETUP/ENTER.
2 Press
Y/B and " to select DVD Setup Menu.
3 Press
Y/B and " to select Rating Control. If the Enter Password screen
appears, then Require Password has already been set to Yes. Skip to step 5.
4 Press
Y/B and " to select and set Require Password as follows:
NO Indicates that Rating Control is disabled.
YES Indicates that Rating Control is enabled, and a password is required to
change Rating Control options.
5 Enter a 4-digit password using the 0-9 keys on the remote control. Be sure to
write down your password and store it in a safe place!
6 Press
Y/B and " to select Change Rating Level.
7 Press
Y/B and " to select the desired Rating Level, and then press SETUP/
ENTER to save and exit.
Change Password
1 Press SETUP/ENTER.
2 Press
Y/B and " to select DVD Setup Menu.
3 Press
Y/B and " to select Rating Control.
4 Use the 0-9 keys to enter the current password.
5 Press
Y/B and " to select Change Password.
6 Use the 0-9 keys to enter the new password.
7 Use the 0-9 keys to re-enter the same password.
8 A menu will appear to indicate whether or not the password has been successfully changed. Press SETUP/ENTER to continue.
9 Press RETURN repeatedly to exit the menu system.
• Not all DVDs are rated. (DVDs that are rated higher than the
level you select will not play without entering the password.