Filter
Top Products
15
US
BDV-N9200W/BDV-N7200W/BDV-N5200W
4-485-799-12(1)
D:\NORM'S JOB\SONY HA\SO130077\BDV-N9200_7200_5200_E3200
(PMRF 01)\4485799121_US (U2)\030UNP.fm
masterpage:
Right
F Soft-touch buttons/indicators
N* (play)
x* (stop)
./> (previous/next)
VOL +/–
FUNCTION (page 28)
Selects the playback source.
*Touch and hold N on the main unit
for more than 2 seconds, the built-in
sound demonstration will be played
back on the system. If a USB device is
connected, the audio contents from
the USB device will be played back as
sound demonstration.
Touch x to stop the demonstration.
During the demonstration, the volume
level may be higher than the volume
level you have set.
G (USB) port (page 33)
Place your fingernail in the slot to
open the cover.
H (remote control sensor)
I Z (open/close)
About soft-touch buttons/
indicators
The soft-touch button indicators flash
each time you turn on the main unit,
wait until the indicators stop flashing.
The buttons only function when the
indicators are lit.
•These buttons work when you touch
them lightly. Do not press on them with
excessive force.
•If the button does not work, release the
button and wait for a few seconds. Then,
touch the button again with your finger
covering the button indicator.
Indicators in the top panel display
* High-bandwidth Digital Content Protection
** When you press DISPLAY, the stream information/decoding status is displayed when
the function is set to “TV”. The stream information/decoding status may not appear
depending on the stream or item being decoded.
Note
Note
Stereo sound
is received
(Radio only)
Repeat play
Muting is on
The HDMI (OUT) jack
is correctly
connected to an
HDCP* compliant
equipment with
HDMI input
The system’s status
(radio frequency, etc.)**
BLUETOOTH power
is on