Filter
Top Products
4-7 SET UP Menu
4-64 Chapter 4 Menu Settings
Chapter 4 Menu Settings
Category
H01~
Menu
number
Items related to the hours meter
001~ Items related to VTR operations
101~ Items related to operation panels
Items related to remote interface
301~ Items related to editing
401~ Items related to prerolling
501~ Items related to recording protection
601~ Items related to the time code generator
701~ Items related to the video control
801~ Items related to the audio control
901~ Items related to digital process
201~
A01~ Items related to pull down control
Scrolling items in the VTR SETUP menu
Press the G and g to scroll the items in the VTR
SETUP menu.
To search the menu by category
Items in the VTR SETUP menu are divided into
categories according to type of settings they perform.
Pressing the [F1] (PREV CATEG) button selects the
first item of the previous category.
Pressing the [F2] (NEXT CATEG) button selects the
first item of the next category.
Changing settings
Changing settings
1 Press the G or g button to move the cursor (z)
to the item to be changed.
2 Press the [F7] (CHANGE DATA) button.
The window for changing settings appears.
3 Press the [F7] (CHANGE DATA) button or the G
or g button repeatedly to select the new setting.
When sub-items appear, change the setting as
required with the G or g button, then press the
[F7] (CHANGE DATA) button repeatedly.
4 Press the [F10] (SAVE/EXIT) button.
The new value is set and the window for changing
settings disappears.
5 Repeat Steps 1 to 4 to change more settings.
6 Press the [F10] (SAVE/EXIT) button again.
The new settings are saved and the SETUP menu
display appears again.
SÅVE/
EXIT
CHÅNGE
DÅTÅ
VTR CONTROL 001
PRE-READ
off
4,6 1
2,3
OtherT01~