Filter
Top Products
Chapter 4 Menu Settings 4-55
Chapter 4 Menu Settings
4-5 PF1 Menu (Factory Settings)
The PF (Personal Function) 1 menu is used to register
frequently used menu items.
When shipped from the factory, the PF1 menu contains
the adjustment menu for video signals. If you later use
the PF1 menu to register items from other menus, you
can restore the PF1 menu to its original factory settings
by recalling SETUP BANK F from the VTR memory
banks.
For details on registration methods, see Section 4-1-3,
“Registering Items to the PF1/2 Menus” on page 4-3, and
on restoring factory-set menu items, see Section 4-1-4,
“VTR Memory Bank Function” on page 4-4.
To activate the PF1 menu screen
Press the PF1 button.
PF1 menu display
prst, 0.0 to 141.3%
[F2]
Button
Indication
Settings
[F1] Selects the input video signal.
SDI, SDTI
Note
The SDTI selection is operative only when the
optional HKDV-506A SDTI Board is installed.
Selects the reference signal for
output.
ext, input, auto
[F4]
Adjusts the Y, P
B, and P R output levels
simultaneously.
[F5] Adjusts the Y output level.
prst, 0.0 to 141.3%
[F6] Adjusts the P B output level.
prst, 0.0 to 141.3%
Function
Adjusts the P R output level.
Adjusts the setup level.
prst, –10.0 to +10.0
[F8]
PF1 menu (factory settings)
prst, 0.0 to 141.3%
P
B LEVEL (HD)
VIDEO IN
SERVO REF
MASTER LEVEL (HD)
Y LEVEL (HD)
P
R LEVEL (HD)
SETUP LEVEL (HD)
[F9] Adjusts the sync phase.
prst, –128 to +127
SYNC PHASE (HD)
[F10]
FINE (HD)
Fine adjustment of the sync phase
prst, 0 to 1024
ALT/[F1] Adjusts the Y, B-Y, and R-Y output
levels simultaneously.
prst, 0.0 to 141.3%
MASTER LEVEL (D1)
[F7]
ALT/[F2]
Y LEVEL (D1)
Adjusts the Y output level.
prst, 0.0 to 141.3%
ALT/[F3]
B-Y LEVEL (D1)
Adjusts the B-Y output level.
prst, 0.0 to 141.3%
ALT/[F4] R-Y LEVEL (D1) Adjusts the R-Y output level.
prst, 0.0 to 141.3%
ALT/[F5] VIDEO LEVEL (D2) Adjusts the video level.
prst, 0.0 to 141.3%
ALT/[F6] CHROMA LEVEL (D2) Adjusts the chroma level.
prst, 0.0 to 141.3%
ALT/[F7] HUE (D2) Adjusts the hue.
prst, –30 to +30
ALT/[F8]
SETUP LEVEL (D1/D2)
Adjusts the setup level.
prst, 0 to +10.0
ALT/[F9] SYNC PHASE (SD) Adjusts the sync phase.
prst, –128 to +127
ALT/[F10] FINE (SD) Fine adjustment of the sync phase
prst, 0 to 1024
ÅIN --:--:--:-- ÅOUT --:--:--:--
PLAY LOCK
VIDEO
IN
SDI
CH.COND PF1
TCR 2FD F1
IN --:--:--:-- OUT --:--:--:--
00
Ó
00
µ
00
ß
00
ƒ
SERVO
REF
input
MASTER
(HD)
prst
Y
(HD)
prst
PB
(HD)
prst
PR
(HD)
prst
SETUP
(HD)
prst
H PHAS
(HD)
prst
FINE
(HD)
prst
REMAIN-T
L 113min