Sony CCD-TRV107 VCR User Manual


 
58
Step 5: Performing Easy Dubbing
Make sure that your camcorder and VCR are connected, and that the VCR is set to
recording pause.
When you use a video camera recorder, set its POWER switch to VTR/VCR. Set the
POWER switch of your camcorder to PLAYER.
(1) Turn the SEL/PUSH EXEC dial to select START, then press the dial.
(2) Turn the SEL/PUSH EXEC dial to select EXECUTE, then press the dial.
When dubbing ends, your camcorder and VCR stop automatically.
To stop dubbing during editing
Press x on your camcorder.
To quit the Easy Dubbing function
Your camcorder stops when dubbing is complete. Then the display returns to START in
the menu settings.
Press EASY DUBBING to quit the Easy Dubbing function.
Note
If you set the background color to FADE in step 3, the picture may not appear properly
depending on the connected VCR.
You cannot record on the VCR when:
The tape has run out.
The write-protect tab is set to expose the red mark.
The IR SETUP code is not correct.
The button used to cancel recording pause is not correct.
NOT READY appears on the screen when:
START is not carried out.
Dubbing a tape easily Easy Dubbing