Filter
Top Products
66
Notes
•When you view images using your computer with the USB connection, the
following conditions may occur, but do not indicate malfunction:
– The image may fluctuate.
– The image may contain noise, etc.
– The image does not appear properly if the image signal is of a different
TV color system from your camcorder.
•When your camcorder is in the standby mode with a cassette inserted, it turns off
automatically after 5 minutes.
•We recommend setting DEMO MODE to OFF in the menu settings when your
camcorder is in the standby mode, and no cassette is inserted.
•Indicators in the camcorder LCD screen do not appear on images that are captured
into your computer.
If image data cannot be transferred by the USB connection
The USB driver has been registered incorrectly as your computer was connected to your
camcorder before installing the USB driver. Perform the procedure to correctly install
the USB driver (p. 60).
If any trouble occurs
Close all running applications, then restart it.
Carry out the following operations after quitting the application:
–disconnect the USB cable
–turn on/off the power
Seeing the on-line help (operation manual) of ”PIXELA
ImageMixer Ver.1.0 for Sony”
“PIXELA ImageMixer Ver.1.0 for Sony” is provided with on-line help (operation
manual).
(1) Click button located in the upper-right corner of the screen.
The ImageMixer’s Manual screen appears.
(2) You can access the desired topics from the contents.
To close the on-line help
Click located in the upper right corner of the “ImageMixer’s Manual” screen.
If you have any questions about “PIXELA ImageMixer Ver1.0 for Sony”
ImageMixer Ver.1.0 for Sony is a trademark of PIXELA corporation. Refer to the
information web site at: “http://www.imagemixer.com”.
Notes on using your computer
Communications with your computer
Communications between your camcorder and your computer may not recover after
recovering from Suspend, Resume, or Sleep.
Viewing images using your computer – USB Streaming
(Windows users only)