Sony DSR-1600A VCR User Manual


 
60
Maintenance
Chapter 6 Maintenance and Troubleshooting
Displaying the digital hours meter
Use the following procedure.
1 Press the MENU button on the menu control panel.
The menu selection level display appears on the
monitor screen and in the time counter display.
2 Press the j button to select “HOURS METER.”
3 Press the k button.
The cumulative counts by the digital hours meter are
indicated on the monitor screen and in the time counter
display.
Digital hours meter indications on the monitor
screen
All four counts (T1, T2, T3, and CT) are indicated on the
monitor screen.
The four-digit value to the left of the slash (/) is the
resettable trip count, and the right value is the cumulative
total from manufacture.
Digital hours meter indications in the time
counter display
One of the four indications appears in the time counter
display at a time. Use the J and j buttons on the menu
control panel to change the item displayed.
Initially, only the trip value appears. Hold down the k
button to display also the cumulative total from
manufacture, which will appear to the right of the trip
value and the slash (/).
The following illustrates the digital hours meter
indications in the time counter display in all four display
modes. The right-hand indication for each display mode is
the indication you can view while holding down the k
button on the menu control panel.
T1 (OPERATION) mode:
T2 (DRUM ROTATION) mode:
T3 (TAPE RUNNING) mode:
CT (THREADING) mode:
Setup menu
SYSTEM MENU
SETUP MENU
HOURS METER
Monitor screen
Time counter display
Menu selection level display
Hours meter
SYSTEM MENU
SETUP MENU
HOURS METER
Monitor screen
Time counter display
HOURS METER
T1 00000 X10 HOURS
T2 0000/00000 X10 HOURS
T3 0000/00000 X10 HOURS
CT 0000/00000 X10 COUNT
T1:OPERATION
T2:DRUM ROTATION
T3:TAPE RUNNING
CT:THREADING
Resettable trip counts
Unresettable counts
Oper. 00000
Drum 0000
0000/00000
Tape 0000
0000/00000
Thread 0000
0000/00000