Filter
Top Products
32
Recording
Chapter 2 Recording and Playback
For details, refer to the operating instructions for the player.
3 Power on this unit by pressing on the side of the POWER switch.
4 When the REMOTE button is not lit (the external editing control unit is not
used), use the COUNTER SEL button to select the type of time data to be
used.
Each press of this button cycles through three options: COUNTER (CNT
value), TC (time code), and U-BIT (user bit data). The time data type
indicator for each option lights as it is selected.
When the REMOTE button is lit, selection of the time data type is carried
out at the editing control unit.
5 Select the formats of video and audio input signal to be recorded.
Use the buttons in the INPUT SELECT section to select the desired signal
formats. Each selection is shown by a lit indicator in the input selection/
audio mode display section.
a) The indicator does not light even if you press the corresponding button in the INPUT SELECT
section unless the required optional digital input/output board (DSBK-1801) is installed.
Selected time data Time data type indicator
Count value of the time counter COUNTER
Time code TC
User bit data U-BIT
Video input signal
(input connector)
Corresponding button
in the INPUT SELECT
section
Lit indicator in the
input selection/audio
mode display section
Composite signal
(VIDEO IN)
VIDEO IN COMPOSITE in VIDEO
group
Separated Y/C signal
(S VIDEO IN)
VIDEO IN S VIDEO in VIDEO
group
Component signal
(COMPONENT VIDEO
IN)
VIDEO IN Y−R, B in VIDEO group
SDI signal (SDI IN) VIDEO IN
SDI
a)
in VIDEO group
i.LINK-compatible digital
video signal in DV format
( DV IN/OUT)
SDTI/i.LINK
i.LINK
Internal test video signal VIDEO IN SG in VIDEO group
Audio input signal
(input connector)
Corresponding button
in the INPUT SELECT
section
Lit indicator in the
input selection/audio
mode display section
Analog signal
(AUDIO IN CH-1 to CH-
4)
CH-1,1/2 and CH-2,3/4 ANALOG in AUDIO
group
AES/EBU signal
(DIGITAL AUDIO (AES/
EBU) IN)
CH-1,1/2 and CH-2,3/4
AES/EBU
a)
in AUDIO
group
SDI signal (SDI IN) CH-1,1/2 and CH-2,3/4
SDI
a)
in AUDIO group
i.LINK-compatible digital
audio signal in DV format
( DV IN/OUT)
SDTI/i.LINK
i.LINK