Filter
Top Products
Using the menu system
16
Using the menu system
DST-HD500 2-663-710-11(2)
Time Setup
This option allows you to set the time zone in which you are using the
receiver. This will ensure that the time displayed on the i-Plate is
correct.
With the Time Setup option highlighted, press the b or OK button to
adjust. Press the V or v buttons to highlight the required setting. Press
the OK button to confirm.
Restore to Default
This option allows you to reset all the settings to factory default. It is
recommended that you only use this option when you move to a new
area.
With the Restore to Default option highlighted, press the b or OK
button to adjust. Press the B or b buttons to highlight ‘Yes’. Press the
OK button to confirm. Once the receiver has restarted, you will need to
perform the initial tuning setup procedure (refer to page 11).
S/W Update
This option allows the software in your receiver to be upgraded. It is
recommended that this is performed ONLY by experienced Sony
service personnel. Please contact your local Sony service centre for
details on this option.
Information
This option displays the receiver’s current hardware and software
versions. You may be asked to quote these details when contacting
your local Sony service centre.
With the Information option highlighted, press the b or OK button to
display the current hardware and software versions. Press the
RETURN button to cancel.
DST-HD100A.book Page 16 Saturday, September 17, 2005 5:36 AM