Filter
Top Products
62
Controlling Your TV or AV
Amplifier (Receiver) with
the Supplied Remote
By adjusting the remote signal, you can
control your TV with the supplied remote.
If you connect the player with an AV
amplifier (receiver), you can control the
volume with the supplied remote.
Notes
• Depending on the unit being connected, you may
not be able to control your TV or AV amplifier
(receiver) using some of the buttons below.
• If you enter a new code number, the code number
previously entered will be erased.
• When you replace the batteries of the remote, the
code number you have set may be reset to the
default setting. Set the appropriate code number
again.
Controlling TVs with the remote
1 Hold down TV [/1, and enter your TV’s
manufacturer’s code (see “Code
numbers of controllable TVs” below)
using the number buttons.
2 Release TV [/1.
The remote is set to perform the
followings:
* Once you set a code number for your AV
amplifier (receiver), the VOL +/– buttons on the
remote control the AV amplifier’s volume only. If
you would rather control the TV’s volume, set the
code number to “90” (default) to control the TV’s
volume again.
Code numbers of controllable TVs
If more than one code number is listed, try
entering them one at a time until you find the
one that works with your TV.
TV [/1 Turns the TV on or off
VOL +/–* Adjusts the volume of the TV
TV/VIDEO Switches the TV’s input
source between the TV and
other input sources
TV [/1
VOL +/–
TV/VIDEO
Number
buttons
Manufacturer
Code number
Sony 01(default), 03, 04
Aiwa 32
Akai 68
Blaupunkt 10, 21
Grundig 10, 11
Hitachi 24
JVC 33
LG 06
Loewe 45
Mitsubishi 27, 28, 50
Mivar 09
NEC 66
Nokia 15, 16, 69
Orion 47, 48
Panasonic 17, 49
Philips 06, 07, 08
Pioneer 26
Saba 12, 13
Samsung 22, 23
Sanyo 25
Sharp 29
Siemens 39
TEAC 67
Telefunken 36
Thomson 43
Toshiba 38