Filter
Top Products
D:\##sagyou\#05 May\824163S
DVPNC555ES_US\3082036112
DVPNC555ES_US\01US05HOO-U2.fm
master page=left
DVP-NC555ES
3-082-036-11(2)
28
6 Press ENTER.
The Setup Display for selecting the
aspect ratio of the TV to be connected
appears.
7 Press X/x to select the setting that
matches your TV type.
◆ If you have a 4:3 standard TV
• 4:3 LETTER BOX or 4:3 PAN SCAN
(page 71)
◆ If you have a wide-screen TV or a 4:3
standard TV with a wide-screen mode
• 16:9 (page 71)
8 Press ENTER.
The Setup Display for selecting the type
of video signal appears.
9 Press X/x to select the type of
signals you wish to output to your
TV.
Select “PROGRESSIVE” only if you
have made video pattern C (page 18) and
wish to view progressive video signals.
◆ Interlace format TV (standard TV)
• INTERLACE (pages 72)
◆ Progressive format TV
•
PROGRESSIVE (
pages 72)
10Press ENTER.
The Setup Display for selecting the type
of jack used to connect your amplifier
(receiver) appears.
11Press X/x to select the type of
jack (if any) you are using to
connect to an amplifier (receiver),
then press ENTER.
Choose the item that matches the audio
connection you selected on pages 22 to
25 ( through ).
• If you connect just a TV and nothing
else, select “NO.” Quick Setup is
finished and connections are complete.
• Select “AUDIO OUTPUT L/R.” Quick
Setup is finished and connections are
complete.
• Select “DIGITAL OUTPUT.” The Setup
Display for “DOLBY DIGITAL” appears.
or both and
• Select “DIGITAL & 5.1CH OUTPUT.”
The Setup Display for “DOLBY
DIGITAL” appears.
12Press X/x to select the type of
Dolby Digital signal you wish to
send to your amplifier (receiver).
Choose the signal that matches the audio
connection you selected on pages 23 to
25 ( through ).
SCREEN SETUP
TV TYPE:
SCREEN SAVER:
BLACK LEVEL:
BLACK LEVEL
(
COMPONENT OUT
)
:
BACKGROUND:
4:3 LETTER BOX
4:3 PAN SCAN
4:3 LETTER BOX
COMPONENT OUT:
4:3 OUTPUT:
INTERLACE
FULL
ON
16:9
SCREEN SETUP
TV TYPE:
SCREEN SAVER:
BACKGROUND:
4:3 LETTER BOX
ON
BLACK LEVEL:ON
BLACK LEVEL
(
COMPONENT OUT
)
: ON
JACKET PICTURE
INTERLACE
COMPONENT OUT:
4:3 OUTPUT:
PROGRESSIVE
INTERLACE
Is this player connected to an amplifier
(receiver)? Select the type of jack you
are using.
AUDIO OUTPUT L/R
DIGITAL OUTPUT
DIGITAL & 5.1CH OUTPUT
YES
NO
A
D
A
B-1 C-1
B-2 C-2
D-2
D-1 D-1
D-2
B D
AUDIO SETUP
AUDIO ATT:
AUDIO DRC:
DIGITAL OUT:
DOLBY DIGITAL:
OFF
STANDARD
AUDIO FILTER: SHARP
ON
DOWNMIX:
DOLBY SURROUND
D-PCM
D-PCM
48kHz/96kHz PCM:
DTS:
DOLBY DIGITAL