Filter
Top Products
14
Step 2: Connecting the Video Cords
Connect this player to your TV monitor, projector, or audio component such as an AV amplifier
(receiver) using a video cord. Select one of the patterns A or B, according to the input jack on
your TV monitor, projector, or audio component.
In order to view progressive signal (480p) pictures with a compatible TV, projector, or monitor,
you must use pattern B.
A Video input jack
You will enjoy standard quality images.
B Component video input jacks
(Y, P
B, PR)
You will enjoy accurate color reproduction
and high quality images.
If your TV accepts progressive 480p format
signals, use this connection and set
“PROGRESSIVE (COMPONENT OUT
ONLY)” in “SCREEN SETUP” to “ON”
(page 53) to output progressive signals.
When connecting to a wide screen TV
Depending on the disc, the image may not fit
your TV screen. To change the aspect ratio,
see page 52.
Note
Do not connect a VCR, etc., between your TV and
the player. If you pass the player signals via the
VCR, you may not receive a clear image on the TV
screen. If your TV has only one audio/video input
jack, connect the player to this jack.
A
VIDEO
AUDIO
INPUT
L
R
PR
PB
Y
COMPONENT
VIDEO IN
B
Audio/video
cord (supplied)
l : Signal flow
(yellow)
CD/DVD player
TV, projector or
audio component
(green)
Component video
cord (not supplied)
TV, projector or
audio component
(red)
(blue)
(yellow)
to LINE OUT (VIDEO)
to COMPONENT
VIDEO OUT
(green)
(blue)
(red)
VCR
CD/DVD player
TV
Connect
directly