Sony DVP-NS700V DVD Player User Manual


 
2
WARNING
To prevent fire or shock hazard,
do not expose the unit to rain or
moisture.
To avoid electrical shock, do
not open the cabinet. Refer
servicing to qualified personnel
only.
Mains lead must only be
changed at a qualified service
shop.
This appliance is classified as a
CLASS 1 LASER product. The
CLASS 1 LASER PRODUCT
MARKING is located on the rear
exterior.
CAUTION
The use of optical instruments with
this product will increase eye hazard.
As the laser beam used in this SACD/
DVD player is harmful to eyes, do
not attempt to disassemble the
cabinet.
Refer servicing to qualified personnel
only.
Notice for customers in the
United Kingdom and Republic
of Ireland
A moulded plug complying with
BS1363 is fitted to this equipment for
your safety and convenience.
Should the fuse in the plug supplied
need to be replaced, a 5 AMP fuse
approved by ASTA or BSI to
BS1362, (i.e., marked with or
mark) must be used.
If the plug supplied with this
equipment has a detachable fuse
cover, be sure to attach the fuse cover
after you change the fuse. Never use
the plug without the fuse cover. If
you should lose the fuse cover, please
contact your nearest Sony service
station.
Precautions
Safety
This unit operates on 220 – 240 V
AC, 50/60 Hz. Check that the unit’s
operating voltage is identical with
your local power supply.
To prevent fire or shock hazard, do
not place objects filled with liquids,
such as vases, on the apparatus.
Installing
Allow adequate air circulation to
prevent internal heat buildup.
Do not install the unit in an inclined
position. It is designed to be
operated in a horizontal position
only.
Keep the unit and discs away from
equipment with strong magnets,
such as microwave ovens, or large
loudspeakers.
Do not place heavy objects on the
unit.
Welcome!
Thank you for purchasing this Sony
SACD/DVD Player. Before
operating this player, please read this
manual thoroughly and retain it for
future reference.