Filter
Top Products
80
Notes
• The player can store the settings of up to 50 discs.
When you store the setting of disc number 51, the
first disc setting is cancelled.
• The Playback Memory function cannot be used for
DVD-RWs in VR mode.
• During playback, do not turn off the player by
pressing POWER on the player. Doing so may
cancel the settings. When you turn off the player,
press x first to stop playback and then press [/1 on
the remote. After the power indicator lights up in red
and the player enters standby mode, press POWER
on the player.
xTRACK SELECTION (DVD VIDEO
only)
Gives the sound track which contains the
highest number of channels priority when
you play a DVD VIDEO on which multiple
audio formats (PCM, MPEG audio, DTS, or
Dolby Digital format) are recorded.
Notes
• When you set the item to “AUTO,” the language
may change. The “TRACK SELECTION” setting
has higher priority than the “AUDIO” settings in
“LANGUAGE SETUP” (page 76).
• If PCM, DTS, MPEG audio, and Dolby Digital
sound tracks have the same number of channels, the
player selects PCM, DTS, Dolby Digital, and MPEG
audio sound tracks in this order.
xCD DIRECT
Eliminates the use of unnecessary circuits
when playing CDs.
This setting will be activated when you open/
close the disc tray.
This function affects the output of the
following jacks:
— LINE OUT L/R (AUDIO) jacks
— LINE 1 (RGB)-TV jack
— 5.1CH OUTPUT jacks
Note
If you select “ON” when playing CD type DTS discs,
the sound will become noisy.
OFF
No priority given.
AUTO
Priority given.
OFF
Select this when playing CD discs,
including CD type DTS discs.
ON
Eliminates the use of unnecessary
circuits needed to play CDs.