Filter
Top Products
20
Connect the SCART (EURO AV) cord (not supplied). Be sure to make the connections firmly to
avoid hum and noise. When you connect using the SCART (EURO AV) cord, check that the TV
conforms to S video or RGB signals. Refer to the operating instructions supplied with the TV to
be connected. Also, when you set “LINE” to “S VIDEO” or “RGB” under “SCREEN SETUP”
in the Setup Display (page 77), use a SCART (EURO AV) cord that conforms to each signal.
Connect the yellow plug of the audio/video cord (supplied) to the yellow (video) jacks. You will
enjoy standard quality images.
Use the red and white plugs to connect to the audio input jacks (page 23).
Connect the S VIDEO cord (not supplied). You will enjoy high quality images.
If you are connecting to a VCR
Connect your VCR to the LINE 2 jack on the player. The VCR can record the signal only from
your TV.
Notes
• Do not connect the player to a VCR. If you pass the player signals via the VCR, you may not receive a clear image
on the TV screen.
• If you cannot view the pictures from a VCR through this player which is connected to a TV with RGB component
jacks, set to t (Audio/Video) on your TV. When you select (RGB), the TV cannot receive the
signal from the VCR.
A If you are connecting to a SCART (EURO AV) input jack
B If you are connecting to a video input jack
C If you are connecting to an S VIDEO input jack
Yellow (Video)
White (L)
Red (R)
Yellow (Video
)
White (L)
Red (R)
VCR
SACD/DVD player
TV
Connect
directly