Filter
Top Products
Hookups
21
• If you want to use your VCR’s SmartLink function, connect the VCR to your TV’s SmartLink jack and connect
the player to the TV with another jack.
• The SmartLink function may not work properly if your VCR is connected to your TV via the SCART (EURO AV)
jacks on the player.
• When you connect the player to your TV via the SCART (EURO AV) jacks, the TV’s input source is set to the
player automatically when you start playback or press any button except for POWER on the player or \/1 on the
remote. In this case, press TV/DVD on the remote to return the input to the TV.
When you play a disc recorded in the NTSC colour system, the player outputs the video
signal or the Setup Display etc. in the NTSC colour system and the picture may not appear
on the PAL colour system televisions. In this case, open the tray and remove the disc.