Filter
Top Products
57
Sound Adjustments
*“PCM,” “MPEG,” “DTS,” or “DOLBY
DIGITAL” is displayed.
In the case of “DOLBY DIGITAL,” the
channels in the playing track are displayed
by numbers as follows:
For Dolby Digital 5.1 ch:
**The letters in the programme format
display indicate the following sound
components:
L: Front (left)
R: Front (right)
C: Centre
LS: Rear (left)
RS: Rear (right)
S: Rear (monaural): The rear
component of the Dolby
Surround processed signal and
the Dolby Digital signal
LFE: Low Frequency Effect signal
z Hint
When playing Dolby Digital sound tracks or DTS
sound tracks (DVP-NS905V only), “LFE” is
enclosed in a dotted line when the LFE signal is not
being output.
Notes
• If “DTS” is set to “OFF” in “AUDIO SETUP”
(page 80), the DTS track selection option will not
appear on the screen even if the disc contains DTS
tracks (DVP-NS705V only).
•“LFE” is always enclosed in a solid line when
playing DTS sound tracks regardless of the LFE
signal component being output (DVP-NS705V
only).
DVD VIDEO
1: ENGLISH
1 8
(
3 4
)
1 2
(
2 7
)
T
1 : 3 2 : 5 5
LRC
DOLBY DIGITAL 3/2.1
PROGRAM FORMAT
LFE
LS RS
Current audio format*
Currently playing programme format**
DOLBY DIGITAL
3 / 2 . 1
LFE (Low Frequency
Effect) component 1
Rear component 2
Front component 2+
Centre component 1