Filter
Top Products
28
• D-PCM (page 76)
• DOLBY DIGITAL (only if the
amplifier (receiver) has a Dolby Digital
decoder) (page 76)
13Press ENTER.
“DTS” is selected.
14Press X/x to select whether or
not you wish to send a DTS signal
to your amplifier (receiver).
Choose the item that matches the audio
connection you selected on pages 23 to
25 ( through ).
• OFF (page 77)
• ON (only if the amplifier (receiver) has
a DTS decoder) (page 77)
15Press ENTER.
Quick Setup is finished. All connections
and setup operations are complete.
If your AV amplifier (receiver) has an
MPEG audio decoder, set “MPEG” to
“MPEG” (page 77).
Enjoying the surround sound
effects
To enjoy the surround sound effects of this
player or your amplifier (receiver), set the
following items as described below for the
audio connection you selected on pages 23 to
25 ( through ). Each of these is the
default setting and does not need to be
adjusted when you first connect the player.
See page 71 for using the Setup Display.
Audio Connection (pages 23 to 25)
• No additional settings are needed.
• Set “DOWNMIX” to “DOLBY
SURROUND” (page 76).
• Set “DOWNMIX” to “DOLBY
SURROUND” (page 76).
• Set “DIGITAL OUT” to “ON” (page 76).
B-2 C-2
D
AUDIO SETUP
AUDIO ATT:
AUDIO DRC:
DIGITAL OUT:
DOLBY DIGITAL:
MPEG:
OFF
STANDARD
AUDIO FILTER: SHARP
ON
DOWNMIX:
DOLBY SURROUND
D-PCM
PCM
OFF
48kHz/96kHz PCM:
DTS:
ON
48kHz/16bit
OFF
B D
B-2 C-2
D
B D
A
B-1
C-1
B-2 C-2 D